WH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 Degrees

WH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 Degrees
WH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 DegreesWH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 DegreesWH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 Degrees



Feature:

Product Name: Digital temperature controller
Specification Model: XH-W1315
Input voltage: DC12V/24V/AC220
Motherboard power consumption: 3W
Temperature control range: -30~999C
Measurement input: K-Type thermocouple
Temperature measurement accuracy: 1°C
Temperature measurement accuracy: +-2 °C
Output type: one-way relay output
Display window: 38 x 20mm
Overall size: 79 x 51 x 27mm

CodeCode descriptionSetting rangeFactory setting
P0Mode settingCooling C / Heating HH
P1Backlash setting1-50°C5°C
P2Temperature correction -20~20°C0
P3High temperature alarm0-999°COFF

P0 working mode
 
This value must be set when the thermostat is used for the first time. If it is used for heating, it should be set to H. If it is used for cooling, it should be set to C.
 
P1 hysteresis setting
 
Press and hold the setting button for 3 seconds to enter the internal menu and select P1. Press the setting button again to enter the hysteresis value setting state. The hysteresis will start again after the set temperature stops. The default is 2. If you want to modify, press and hold SET to enter P1 mode to modify.
 
P3 temperature correction
 
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
 
P4 high temperature alarm
 
When the measured value is greater than this value, the screen temperature flashes and drip sound alarm, and the temperature control is forcibly disconnected, and the high temperature alarm closing signal is output to remind the user to take measures. Note that the output is the relay closing signal, and the alarm power supply can be connected in series on the output. 

Package includes:

1 x Digital temperature controller























WH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 DegreesSee detail