M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board

M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board
M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger BoardM5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger BoardM5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board


Get M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board


This is without watch accessories,If you like with watch accessories

Description:

M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do? This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.

Item Features:

- 5V DC power supply
- USB Type-C
- ESP32-based
- 4 MByte Flash
- 6- IMU MPU6886
- Red LED
- Buzzer
- IR transmitter
- 1 Buttons, OLED(1.3 inch), 1 Reset
- 2.4G Antenna: Proant 440
- 95 mAh Lipo Battery
- Extendable Socket
- Grove Port
- Wearable & Wall mounted
- Development Platform UIFlow, MicroPython,  for

ESP32 Features:

- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth
- Hall sensor
- 10x capactive touch interface
- 32 kHz crystal oscillator
- PWM/timer input/output available on every GPIO pin
- SDIO master/salve 50MHz
- card interface support

PinMap:

RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32GPIO10GPIO9GPIO37GPIO39
RED LEDLED PIN


IR Transmitter
Transmitter Pin

Button A

Button Pin
Button B


Button Pin

TFT LCD
Driver IC:ST7735S
Resolution:80 * 160

ESP32GPIO15GPIO13GPIO23GPIO18GPIO5
TFT LCDTFT_MOSITFT_CLKTFT_DCTFT_RSTTFT_CS

GROVE PORT
ESP32GPIO33GPIO325VGND
GROVE portSCLSDA5VGND

MIC (SPM1423)
ESP32GPIO0GPIO34
MICPHONESCLSDA

6- posture sensor (MPU6886) & power management IC (AXP192)
ESP32GPIO22GPIO21
6- posture sensorSCLSDA
power management ICSCLSDA

Power on / off:

Power on: Click the reset button
Shutdown: Double the reset button

datasheet


Example

Comparision Between Different Development Kits of M5


  • For details click here

  • Download chart click here



Description:

PowerC HAT is a charging module specially designed for m5stickc, with built-in ip3005 high-precision lithium battery protection IC and ip5209 power management IC. It uses I2C communication protocol to carry out data transmission with m5stickc of the host computer, and can check the voltage, current and other information through programming. The back battery seat of the module can be installed with two 16340 batteries, which can be charged by the charging module, and can also be used as a charging treasure to provide external power through the battery In addition, the module provides an I2C interface for connecting I2C peripherals, a typec interface for power input, a usb-a bus for power output, with a voltage output of 5V / 1.5A and an input voltage of 5V. The module is equipped with an independent switch, which can be opened once and closed twice.

Product Features:

  • Battery testing

  •  power bank

  • Battery charger

  • IIC Address 0x75

Weight & Dimension:

  • Dimension: 55mm x 35mm
  • Weight: 19g
 
Package Included:

1 x M5StickC
1 x USB Type-C cable
 1 x PowerC HAT(include battery 2 * 750mAh)






M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger BoardSee detail